Table of Contents
Advertisement
LinkIQ
Users Manual
Item
Dual B
D
Powered pairs
E
HW: Class
F
Watts at PD
G
Volt minimum
H
Volts under load
SW Negotiated
I
Class:
J
Watts at PD
K
Volt minimum
L
Volts under load
26
1.800.561.8187
Table 12. PoE Test Results (cont.)
Description
Tap to view Dual B signature power results.
: Indicates the switch can negotiate dual signature power
on pairs 4,5 and 7,8.
The tab is gray if the switch cannot negotiate dual signature
power.
Shows which pairs have power.
The hardware negotiated power class (Class 0 to Class 8) of
the PSE device.
The loaded power in watts provided by the PSE at the PD.
The minimum required volts the device needs to meet under
load per the IEEE 802.3 standard based on the HW
negotiated power class (
Measured voltage under load at reported power draw.
: Indicates the voltage meets the requirements for the
HW negotiated power class (
The software negotiated power class (Class 1 to Class 8) of
the device.
The loaded power in watts provided by the PSE at the PD.
The minimum required volts the device needs to meet under
load per the IEEE 802.3 standard based on the SW
negotiated power class (
Measured voltage under load at reported power draw.
: Indicates the voltage meets the requirements for the
SW negotiated power class (
www.
Function
).
E
E
).
I
).
).
I
information@itm.com
.com
Hide quick links:
Advertisement
Table of Contents
