Fluke 1507 User Manual

Fluke 1507 User Manual

Insulation testers
Hide thumbs Also See for 1507:

Advertisement

1507/1503
Insulation Testers
Users Manual
June 2005 Rev. 1, 2/19
 2005-2019 Fluke Corporation. All rights reserved.
All product names are trademarks of their respective companies.
MyFlukeStore
1.800.561.8187
www.
.ca
Shop for Fluke products online at:

Advertisement

loading

  Related Manuals for Fluke 1507

  Summary of Contents for Fluke 1507

  • Page 1 1507/1503 Insulation Testers Users Manual June 2005 Rev. 1, 2/19  2005-2019 Fluke Corporation. All rights reserved. All product names are trademarks of their respective companies. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 2 LIMITED WARRANTY AND LIMITATION OF LIABILITY Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is one year and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling.
  • Page 3: Table Of Contents

    Making Measurements ....................11 Measuring Volts ......................12 Measuring Earth-Bond Resistance ................12 Measuring Insulation Resistance ................14 Measuring Polarization Index and Dielectric Absorption Ratios (Model 1507) ....15 Using the Compare Function (Model 1507) ..............17 Cleaning ......................... 18 MyFlukeStore 1.800.561.8187...
  • Page 4 Insulation Specifications .................... 24 Model 1507 ......................25 Model 1503 ......................26 IEC 61557 Specification ..................26 Insulation Resistance Maximum and Minimum Display Values ......28 Earth-Bond Resistance Maximum Display Values ..........32 MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 5: Introduction

    Introduction The Fluke model 1507 and model 1503 are battery-powered insulation testers (the Tester). Although this manual describes the operation of both Models 1507 and 1503, all illustrations and examples assume use of model 1507. These Testers meet IEC 61010 standards. The...
  • Page 6: Safety Information

    Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc. • Do not apply more than the rated voltage, between the terminals or between each terminal and earth ground. • Use the correct terminals, function, and range for measurements. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 7 The battery door must be closed and locked before you operate the Product. • Do not operate the Product with covers removed or the case open. Hazardous voltage exposure is possible. • Have an approved technician repair the Product. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 8 WEEE Directive Annex I, this product is classed as category 9 "Monitoring and Control Instrumentation" product. Do not dispose of this product as unsorted municipal waste. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 9: Unsafe Voltage

    The 10-minute timer is disabled during any insulation resistance or earth bond resistance measurement. The time period starts immediately following any measurement. bbw03f.emf Figure 1. Rotary Switch MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 10: Buttons And Indicators

     Model 1503.  250V Performs insulation tests with 50, 100, 250, 100V 500 and 1000 V dc source on the 1507 or 500 and 1000 V dc source on the 1503. bbw02f.emf Figure 2. Buttons and Indicators MyFlukeStore 1.800.561.8187 www.
  • Page 11 Turns the backlight on and off. The Pass indicator. Indicates when the  backlight goes off after 2 minutes. insulation resistance measurement is  greater than the selected compare limit. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 12: Understanding The Display

    XW Warning To avoid false readings, which could lead to possible electric shock or personal injury, bbw01f.emf Figure 3. Display Indicators replace the battery as soon as the low battery indicator appears. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 13 Indicates an out of range value. Invalid calibration data. Calibrate the Tester. Secondary display    Indicates selected pass/fail compare COMPARE value. Insulation test indicator. Appears when  insulation test voltage is present. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 14: Input Terminals

    Tester from OFF to any switch position. Power-up options are cancelled when the bbw08f.emf Tester is turned OFF. Power-up options are described in Figure 4. Input Terminals Table 7. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 15: Making Measurements

     and enters Calibration mode the Tester, disconnect circuit power and when the button is released. discharge all high-voltage capacitors before testing. Note Power Up options are active when the button is pressed. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 16: Measuring Volts

    Tester is turned off. If the probe resistance is >2 Ω, the resistance will not be saved. Connect the probes to the circuit to be measured. The Tester automatically detects if the circuit is energized. bbw09f.emf Figure 5. Measuring Volts MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 17 When resistance is higher than the maximum display range, the Tester displays the > symbol and the maximum resistance for the range. bbw04f.emf Figure 6. Measuring Earth-Bond Resistance MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 18: Measuring Insulation Resistance

    >30 V warns if voltage more than 30 V ac or dc is present. In this condition, the test is inhibited. Disconnect the Tester and remove power before proceeding. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 19: Measuring Polarization Index And Dielectric Absorption Ratios (Model 1507)

    Insulation Testers Measuring Polarization Index and Dielectric Absorption Ratios (Model 1507) Measuring Polarization Index and Dielectric Absorption Ratios (Model 1507) 1507 INSULATION TESTER Polarization Index (PI) is the ratio of the 10-minute insulation resistance to the 1 minute insulation resistance.
  • Page 20 () along with a primary display showing the automatically be discharged through the Tester. resistance in MΩ or GΩ. The  icon appears on the lower portion of the display until the test is finished. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 21: Using The Compare Function (Model 1507)

    Insulation Testers Using the Compare Function (Model 1507) Using the Compare Function (Model 1507) 1507 INSULATION TESTER Use the Compare function to set a pass/fail compare level for the insulation measurements. To use the Compare function: Press the  button to select the desired compare value.
  • Page 22: Cleaning

    The voltage function displays clear and the measured battery voltage is shown in the primary display for 2 seconds, the voltage display then returns. bbw11f.emf Figure 9. Using the Compare Function MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 23: Testing The Fuse

    Turn the rotary switch to the  position. Press and hold . If the display reading is , the fuse is bad and should be replaced. bbw06f.emf Figure 10. Testing the Fuse MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 24: Replacing The Batteries And Fuse

    Figure 11. Replacing the Fuse and Battery Remove and replace the batteries. Replace the battery door and secure by turning the battery door lock until the lock symbol aligns with the arrow. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 25: Specifications

    Size ................. 5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L) Weight ..............550 g (1.2 lb) Ingress Protection Rating ........IEC 60529: IP40 Altitude Operating ............. 2000 m Storage ..............12 000 m Over-Range Capability ..........110 % of range MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 26 This equipment is intended for use in business environments and not to be used in homes. USA (FCC) ............47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 27: Ac/Dc Voltage Measurement

    Input Impedance ..........3 MΩ (nominal), <100 pF Common Mode Rejection Ratio (1 kΩ unbalanced) ..........>60 dB at dc, 50 Hz or 60 Hz Overload Protection ..........600 V rms or dc MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 28: Earth-Bond Resistance Measurement

    Measurement Range ........... 0.01 MΩ to 10 GΩ model 1507, 0.01 MΩ to 2000 MΩ model 1503 Test Voltages ............50, 100, 250, 500, 1000 V dc model 1507, 500 and 1000 V dc model 1503 Test Voltage Accuracy ........+20 %, -0 % Short-Circuit Test Current ........
  • Page 29: Model 1507

    1000 V dc 200 to 2000 MΩ 1 MΩ 1 mA @ 1 MΩ (0 % to + 20 %) ± (10 % + 3) 2.0 to 10.0 GΩ 0.1 GΩ MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 30: Model 1503

    30 % Depends on test voltage and range. Insulation Resistance 30 % See Insulation Test specifications. [1] This specification comes from the standard and indicates the maximum amount allowable by the standard. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 31 Specifications IEC 61557 Influence Variables and Uncertainties Earth-Bond Resistance Uncertainty for Insulation Uncertainty for Earth-Bond Designation per EN61557 Influence Variable Resistance Resistance Supply Voltage Temperature [1] Specification confidence level 99 %. MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 32: Insulation Resistance Maximum And Minimum Display Values

    0.10 0.08 0.10 0.09 0.12 0.09 0.12 0.09 0.12 0.09 0.12 0.13 0.13 0.13 0.13 0.26 0.26 0.26 0.26 0.39 0.39 0.39 0.39 0.52 0.52 0.52 0.52 0.65 0.65 0.65 0.65 MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 33 1.04 1.04 1.04 1.17 1.17 1.17 1.17 1.30 1.30 1.30 1.30 2.60 2.60 2.60 2.60 3.90 3.90 3.90 3.90 5.20 5.20 5.20 5.20 6.50 6.50 6.50 6.50 7.80 7.80 7.80 7.80 MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 34 65.0 50.0 65.0 50.0 65.0 50.0 65.0 60.0 78.0 60.0 78.0 60.0 78.0 60.0 78.0 70.0 91.0 70.0 91.0 70.0 91.0 70.0 91.0 80.0 104.0 80.0 104.0 80.0 104.0 80.0 104.0 MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 35 130.0 100.0 130.0 100.0 130.0 200.0 260.0 200.0 260.0 300.0 390.0 300.0 390.0 400.0 520.0 400.0 520.0 500.0 650.0 600.0 780.0 700.0 910.0 800.0 1040.0 900.0 1170.0 1000.0 1300.0 2000.0 2600.0 MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...
  • Page 36: Earth-Bond Resistance Maximum Display Values

    20.0 14.0 500.0 350.0 0.63 30.0 21.0 600.0 420.0 40.0 28.0 700.0 490.0 50.0 35.0 800.0 560.0 60.0 42.0 900.0 630.0 70.0 49.0 1000.0 700.0 80.0 56.0 2000.0 1400.0 90.0 63.0 MyFlukeStore 1.800.561.8187 www. Shop for Fluke products online at:...

This manual is also suitable for:

1503