Fluke LinkIQ User Manual page 19

LinkIQ
Users Manual
Item
D
Remote ID label
Wire and shield
E
identifiers (far end)
F
Wire map results
Wire and shield
G
identifiers (near
end)
Cable performance
H
results
16
1.800.561.8187
Table 8. Cable Test Results Screen (cont.)
Description
Shows the Remote ID number used in the test and information
about the test.
Remote ID The Product detects the Remote ID and the
wire map test passes.
Remote ID The Product detects the Remote ID, but the
wire map test fails.
No Remote ID There is a short on the cable under test,
so the Product cannot detect the Remote ID. The wire map
test fails.
No Remote ID The test did not detect the Remote ID
because a Remote ID is not connected.
See Wire Map
Numbers: Indicates which wire from the near end maps to
which wire on the far end.
SH: Indicates the shield on the far end of a cable.
Shows the results of the wire map. See
A red box around a wire number indicates that the wire did not
pass based on the settings selected for the test.
A red box around SH indicates that the continuity of the shield
test did not pass.
When a wire map passes, the results show:
• The cable performance capability.
• Whether the cable performance test passes (green) or
fails (red) based on the test limit selected for the test. If a
wire map fails, the segments show gray because the
Product cannot determine the cable performance
capability.
www.
Function
Screens.
information@itm.com
.com
Wire Map Screens.