Table of Contents
Advertisement
Maintenance
To prevent possible electrical shock, fire, or personal injury:
•
Do not open the case. You cannot repair or replace parts in the case.
•
Use only specified replacement parts.
•
Have an approved technician repair the Product.
Clean the Product
Clean the case and display with a soft cloth dampened with water and a mild soap solution. Do
not use solvents, isopropyl alcohol, or abrasive cleansers.
To clean the ports, use a pressurized can of air or a dry nitrogen-ion gun, if available, to blow the
particulates from the ports.
Battery
The Product only operates on battery power. You cannot do a test while the battery
charges.
To prevent possible electrical shock, fire, personal injury, or damage to the
Product:
•
Use only Fluke Networks approved power adapters to charge the battery.
•
Batteries contain hazardous chemicals that can cause burns or explode. If
exposure to chemicals occurs, clean with water and get medical aid.
•
Do not disassemble the battery.
•
Do not put battery cells and battery packs near heat or fire. Do not put in sunlight.
•
Do not disassemble or crush battery cells and battery packs.
•
Do not short the battery terminals together.
•
Use only the external mains power supply included with the Product.
1.800.561.8187
XW Warning
Note
XW Warning
www.
.com
Cable+Network Tester
Maintenance
information@itm.com
31
Hide quick links:
Advertisement
Table of Contents
