Fluke LinkIQ User Manual page 22

Figure 4 shows a wire map that fails because wires 1 and 2 are shorted together. The length of
the wire on the wire map indicates the distance to the short. With wires shorted together, the
Product cannot detect the Remote ID. Repair the short and do the test again to verify the wire
map of the other pairs.
Figure 5 shows a wire map of a cable test that fails because pairs 3,6 and 7,8 are split pairs.
1.800.561.8187
Figure 4. Wires Shorted Together
Wire Map
Figure 5. Split Pairs
1
Split pair
www. .com
Cable+Network Tester
information@itm.com
Tests
19