Fluke LinkIQ User Manual page 13

LinkIQ
Users Manual
Option Menu
General Settings
Auto Increment
PoE Test
CDP/LLDP
Timeout
Auto Shutoff
Sound
Numbers
Units
10
1.800.561.8187
Table 6. Settings Menu (cont.)
Option
Automatically increments the Test ID by one number or
On
letter for the next test.
Off Use to manually increment the Test ID.
Enable PoE detection. Use to do a PoE test after you do
On
a network switch test.
Disable PoE detection. Use to decrease the time to do a
Off
switch test.
Tap to select the time in seconds to wait for a CDP/LLDP
<options> response before the Product retries network discovery.
The default is 30 sec.
Use the slider bar at the right of the image to adjust the
--
brightness of the image.
The Product turns off after 15 minutes of no use. While
On
the Product charges, Auto Shutoff is disabled.
The Product remains on until the battery needs to be
Off
charged again.
The Product emits an audible sound at the completion of
On
a test.
The Product does not emit an audible sound at the
Off
completion of a test.
-- Set or view the decimal point indicator.
-- Set or view the units to use in measurements.
www.
Description
information@itm.com
.com