Connecting To Multisite Vm3 - LG MultiSITE VM3 Startup Manual

Connecting to MultiSITE VM3

Once the MultiSITE VM3 has powered up, connect to it with MultiSITE Supervisor using "Open Platform." A platform connection to any Multi-
SITE VM3 is required for most host-level operations. This includes installing Niagara 4.1 core software and modules and performing various
other platform tasks.
After you open a platform connection, you can run the Commissioning Wizard.
Opening a platform connection to a MultiSITE VM3
1. From the menu bar, select File > Open > Open Platform. The Open Platform dialog box appears.
2. Complete the fields in the Open Platform dialog box as follows:
• Type— Select Platform Connection, if not already selected.
By default, MultiSITE Supervisor prompts for a Platform TLS Connection.
• Host: Leave at default IP, and type in the IP address of the new MultiSITE VM3.
• Port: Leave at default 5011.
• Credentials, which may be the following:
Username: Type in default username.
Password: Type in default password.
3. Click the OK button to accept all settings.
The Platform opens in the tree, and its Nav Container View displays in the view pane.
PREPARATION FOR COMMISSIONING
Figure 3: Connected Platform.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
15