LG MultiSITE VM3 Startup Manual page 46

PLATFORM SERVICES (STATION) AND
ADMINISTRATION
Performing platform administration
Prerequisite: The MultiSITE VM3 controller is already commissioned using the Commissioning Wizard.
1. Using MultiSITE Supervisor, open a platform connection to the MultiSITE VM3 controller. Use the platform credentials you specified when
creating a platform user while commissioning the MultiSITE VM3.
2. In the MultiSITE VM3 platform's Nav Container View, double-click Platform Administration.
3. In the Platform Administration view, click any of the following to review or make changes:
• View Details: A platform summary that you can copy to the Windows clipboard.
• User Accounts: A platform daemon authentication dialog to add, delete, or manage platform users. This is initially performed as a step
in the Commissioning Wizard.
• System Passphrase: A dialog to set or change the system passphrase used to encrypt sensitive information on the platform's file sys-
tem.
• Change HTTP Port: A dialog to change the HTTP port for the MultiSITE VM3's platform daemon from port 3011 to some other port.
• Change TLS Settings: A dialog to specify platform SSL settings, including enabling/disabling, port, PKI certificate to authenticate by,
and secure protocol to use.
• Change Date / Time: A dialog to change the MultiSITE VM3's current date, time, and time zone. This is initially performed as a step in
commissioning wizard.
• Advanced Options: A dialog to enable or disable the following advanced platform options.
• SFTP / SSH Enabled: A dialog to enable/disable SFTP and SSH access to the MultiSITE VM3, or change the default port number that
these protocols use/share.
• Daemon Debug Enabled: Temporarily enable the browser based daemon debugging tools. This is automatically turned off the next time
the system boots.
• USB Backup Enabled: Enable or disable the USB Backup port on the MultiSITE VM3 enclosure.
• Change Output Settings: A dialog to change the log level of different processes that can appear in the platform daemon output.
• View Daemon Debug: A window in which you can observe debug messages from platform daemon processes in real time. Also includes
ability to pause or load.
• View System Log: A window for viewing system log(s) for the platform.
• Configure Runtime Profiles: A dialog to change the types of runtime profiles for software modules installed on the MultiSITE VM3. This
is initially performed in commissioning wizard.
• Configure NRE Memory: A dialog to configure the memory allocation sizes of this platform's Niagara Runtime Environment.
• Backup: Make a complete backup of all configuration on the connected host platform, including all station files, plus other Niagara
configuration. This is typically unnecessary for any MultiSITE VM3 that just started up.
• Commissioning: Another way to re-launch the Commissioning Wizard, as previously used in the initial commissioning of the MultiSITE
VM3.
• Reboot: A method to reboot the MultiSITE VM3 platform, which restarts all software including the OS and JVM, and then the platform
daemon, and then, if so configured in the Application Director (Station Director), the installed station. If you click this, a confirmation
dialog appears. If you reboot, your platform connection is lost, and it is typically a few minutes until you can reconnect to this MultiSITE
VM3.
46
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.