Table of Contents
Advertisement
RUNNING THE COMMISSIONING WIZARD
Selecting modules
At the select modules step, a popup "Rebuilding software list" dialog briefly appears as the dependencies of the MultiSITE VM3 are com-
pared against the available software modules in your MultiSITE Supervisor PC's "software database." During commissioning, you add to the
software modules that are preselected for installation. Sometimes you may not make any changes, as the wizard preselects all necessary
"core" modules, plus any additional modules needed by the station you previously specified in the Install Station step.
However, you may need to select additional modules, including a few not directly related to the contents of the station selected for installa-
tion. Examples include lexicon module(s), or some modules related to Platform Services. Or, if you know that the MultiSITE VM3 controller
will need one or more modules in the future (for a driver for example), you can install them now.
In general, do not select modules if you are not sure they are needed. You can manage software modules anytime later, using the Software
Manager. Also, if you install a station later, the Station Copier will automatically prompt for confirmation to install any additional modules
deemed necessary.
Figure 16: Module installation dialog (default).
Due to our policy of continuous product innovation, some specifications may change without notification.
25
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Hide quick links:
Advertisement
Table of Contents
