LG MultiSITE VM3 Startup Manual page 33

Table of Contents

Platform user rules and guidelines

When adding any N4 MultiSITE VM3 controller platform admin user, the following rules apply:

• User Name: User Name can be a maximum of 14 alphanumeric characters (a - z, A - Z, 0 - 9), where the first character must be alpha-

betic, and following characters either alphanumeric or underscore ( _ ).

• Password: A strong password is required (it must match in both password fields). Entry characters display only in asterisks (*). Pass-

word must be a minimum of 10 characters including: at least one uppercase character, at least one lowercase character, and at least

one digit. An error popup appears if attempt to enter a password that does not meet minimum rules. Following are some basic guide-

lines on strong passwords:

Use both upper and lower case.

Include numeric digits (a minimum of one). Include special characters.

Do not use dictionary words. Do not use company name.

Do not make the same as the user name.

Do not use common numbers like telephone, address, birthday, and so on.

• Comment: This is an optional alphanumeric field you can use when adding a new platform admin user, for description purposes only

(note you cannot edit it after adding a user, unlike with a user's password).

Note:

Make note of your platform user credentials, and guard them carefully. Consider the platform daemon as the highest-level access to the

controller.

If you lose or forget these credentials, you will be unable to complete commissioning and startup of this controller. In this case, you can

restore the factory default platform user, provided that you can serially connect to the controller (make serial shell connection), and press a

key at the prompted time during controller boot up following a power cycle.

RUNNING THE COMMISSIONING WIZARD

Due to our policy of continuous product innovation, some specifications may change without notification.

Table of Contents

Show Quick Links

Table of Contents

Pbacnbtr1a