Pc Connection Cable - Canon AX-C4343W Technical Document

Appendix — Optional part —

PC Connection Cable

Connecting the PC Connection Cable to the cable connector on the detector allows you
to expand from a wireless configuration to a wired configuration.
1
Connect the PC Connection Cable.
Connect the PC Connection Cable to the
connector (RJ-45 type) on the laptop
computer and to the cable connector on the
detector. The PC Connection Cable on the
detector side is attached using magnets.
The detector is registered.
Insert the connector pins of the cable into the
openings of the cable connector. The
connector of the cable is attached to the
detector using magnets. Confirm that there is
no space between the two connectors.
72
Important
Attach the battery pack for both wired and wireless configurations.
Important
An imperfect connection may cause the image quality to deteriorate.
Important
Regularly clean the connector terminals on both the detector and the cable to
prevent dust, dirt, or oil attaching to them.
Cable connector
PC Connection
Cable
Openings
Pins