Canon AX-C4343W Technical Document page 50

6
Troubleshooting
Symptom
Failed to turn on.
Power LED lamp
flashes (1-second
cycles) and exposure is
not possible.
A fully charged battery
is consumed quickly.
The battery bay is
unusually hot.
50
Cause
Battery pack is not
attached.
Over-discharge of the
battery pack.
No battery power.
Battery capacity
decreases.
The battery pack was
charged or used in low
temperatures.
The battery pack is
malfunctioning.
Remedy
Attach a charged battery pack.
Replace the battery pack with a fully-
charged one and retry an exposure.
The battery pack is a consumable
item. Use a new, fully charged battery
pack.
In low temperatures, battery capacity
decreases. The battery consumption
rate increases compared to normal
temperatures. Use a battery pack
charged in normal temperatures.
Stop using the battery pack and
consult your sales representative.