Electromagnetic Emissions - Canon AX-C4343W Technical Document

Electromagnetic emissions

The AX-C4343W is intended for use in the electromagnetic environment specified below.
The customer or the user of the AX-C4343W should assure that it is used in such an
environment.
Emission Test
RF emissions
CISPR11
RF emissions
CISPR11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
*
1: Applies to regions where the rated voltage is 220 V or higher. Not applicable to regions where the
rated voltage is less than 220 V.
12
Guidance and manufacturer's declaration for EMD
Table 1
Compliance
GROUP 1
Class A
Class A
*1
Electromagnetic
Environment – Guidance
The AX-C4343W uses RF energy
only for its internal function.
Therefore, its RF emissions are very
low and are not likely to cause any
interference in nearby
electromagnetic equipment.
The AX-C4343W is suitable for use in
all establishments other than
domestic and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic
purposes.
67