List Of Lights / Flashes / Notification Beeps Of The Ready Indicator - Canon AX-C4343W Technical Document

4
Operating procedures
4.5 List of lights / flashes / notification
beeps of the ready indicator
The LED lamps on the ready indicator light up or flash, and the ready indicator beeps to
indicate the remaining time for exposure ready status, X-ray exposure, and X-ray
detection. The LED lamp flash/light pattern and beep sound pattern vary depending on the
selected mode.
Standard Synchronization Mode
LED lamp
Notification
sound
*1 On/Off status changes three times every 0.5 seconds
*2 Only 1 second
Non Generator Connection Mode
LED lamp
Notification
sound
*1 On/Off status changes three times every 0.5 seconds.
*2 Only at the beginning of each time frame
*3 On/Off status changes every 0.5 seconds.
*4 On/Off status changes every 1 second.
*5 Only 1 second
Information
When exposure is disabled, LED lamps on the ready indicator do not light up and the
ready indicator does not beep in all modes.
42
During exposure ready status
Link
(registration)
completed
The 2 LED
The 2 LED lamps light up weakly.
*1
lamps flash .
Three-tone
beep
Link
(registration)
From
completed
start
time
The 2 LED
The 2 LED lamps
lamps
light up weakly.
*1
flash .
Three-tone Single
*2
beep beep
Start time
Single beep
During exposure ready status
(Remaining time)
5 min 60 sec
to 61 to 11
sec sec
The 1 LED
lamp lights
up weakly.
Double Triple
*2 *2
beep beep
During exposure
When the X-ray is
exposed
The 2 LED lamps
*2
light up .
Two-tone beep
During
exposure
When the
10 sec to
X-ray is
end
exposed
The 1 LED
The 2 LED
lamp
lamps light
*3
flashes
*5
up
weakly.
Two-tone
*4
Triple beep
beep
.