Canon AX-C4343W Technical Document page 10

1
Safety information
When a problem occurs
• Should any of the following occur, immediately turn OFF the power to
the product, unplug the power cord from the AC outlet, and contact
your sales representative:
– When there is smoke, an odd smell or abnormal sound
– When liquid has been spilled into the product or a metal object has entered
through an opening
– When the product has been dropped and is damaged
Inspection, disinfection, and cleaning
• Do not use flammable solvents to clean the surface of the product.
When the product is going to be cleaned, be sure to turn OFF the power to
Prohibited
the product, remove the battery pack, and unplug the power cord from the
AC outlet. Never use alcohol, benzine, thinner or any other flammable
solvents. Otherwise, it could result in fire.
• Clean the plug of the power cord periodically by unplugging it from
the AC outlet and removing dust or dirt from the plug, its periphery
and AC outlet with a dry cloth.
If the cord is kept plugged in for a long time in a dusty, humid or sooty place,
dust around the plug will attract moisture, and this could cause insulation
failure that could result in a fire.
• For safety reasons, be sure to turn OFF the power to the product
when the inspections of the product and cables are going to be
performed.
Otherwise, electric shocks may occur.
• The product must be repaired by a qualified engineer only.
If it is not repaired properly, it could result in fire, electric shock, or accident.
10
WARNING