Advertisement
E T C I n s t a l l a t i o n G u i d e
Setting the Sensitivity
The SimpleTap Occupancy Sensor's sensitivity to motion is adjustable
between maximum and low.
Step 1: Gently insert a small flat blade screwdriver between the Sensor cover
and mounting plate and separate the two pieces.
Step 2: Slide the sensitivity switch to the maximum or low position.
Step 3: Attach the Sensor to the mounting plate. Ensure the link button hole
aligns with the button.
Lin king to a Controll er
After the Sensor has been installed, it must be linked to the correct controller.
Reference the Unison Aero 902 MHz User Programming Guide. ETC
documentation is available for free download at www.etcconnect.com.
sensitivity
switch
Pa ge 7 o f 8
Control Series
Sim pl eT ap Occu pa ncy Sen sor
Advertisement
