Table of Contents
Advertisement
Technical Manual
ePanel-mgx
Hardware description
7.11. Flatpanel-Interface
The display controller on the ePanel-mgx supports only digital TFT flatpanels from 640 x 480 up to 1024 x 768
pixels and up to 64k colors (16bit). The resolution and the type of flatpanel interface supported can be setup in
the BIOS. Please refer to the BIOS section in this manual. Power supply for the Flatpanel can either 3,3V or
5V@800mA typ. (1000mA max.), refer to 8. Jumper settings how to select Panel_VCC.
7.12. Backlight Control and Power Supply
A connector (X904) to drive a backlight inverter for flat panels is provided onboard. Power supply for the back-
light can be either 5V or 12V@800mA typ. (1000mA max.). A software controlled voltage (0V - 4V) is provided
for dimming purposes.
Page 38 of 45 Pages
Advertisement
Table of Contents
