Download Print this page

Product Drawing; Control And Monitoring; Applications; Pump Selection - Grundfos SE1 50 Installation And Operating Instructions Manual

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

2.1 Product drawing

1
2
3
4
5
6
Fig. 1
SE pump
Pos.
Description
1
Lifting bracket
2
Nameplate
3
Sleeve
4
Oil screw
5
Discharge flange
6
Discharge
7
Cable plug
8
Top cover
9
Clamp
10
Pump housing

2.2 Control and monitoring

The pumps can be controlled via the Grundfos controllers LC,
LCD 107, LC, LCD 108, LC, LCD 110 and DC, DCD.
Pumps with a sensor are supplied together with an IO 111 or
IO 113 which can receive signals from the following transmitters:
water-in-oil-sensor (WIO sensor) in the pump
moisture sensor in the motor
temperature sensor in the stator windings
winding resistance sensor in the motor.
For further information, see installation and operating instructions
for the specific sensor.
6

2.3 Applications

SE1 and SEV pumps are designed for pumping these liquids:
large quantities of drainage and surface water
domestic wastewater with discharge from toilets
wastewater with a high content of fibres
(SuperVortex impeller)
7
industrial wastewater
wastewater with gaseous sludge
8
municipal and commercial sewage and wastewater.
SE1 and SEV pumps are ideal for installation in locations such
as:
public buildings
blocks of flats
industry
garages
9
multi-storey car parks
vehicle washing tunnels
restaurants.
10
Stainless steel versions
Stainless steel versions are further more suitable for the following
applications:
industrial process water containing chemicals
aggressive or corrosive drain water and effluent
abrasive particles in wastewater
wastewater contaminated with seawater.
The compact design makes the pumps suitable for both
temporary and permanent installation.

2.4 Pump selection

The table below shows which pump version to select for a
number of liquids:
Impeller type: 1 = S-tube impeller, V = SuperVortex impeller.
Pumped liquid
Drainage water
Domestic wastewater without
discharge from toilets
Domestic wastewater with
discharge from toilets
Wastewater with a high content
of fibres
Industrial wastewater
Wastewater with gaseous sludge
Municipal wastewater
Pump passage [mm]
50
65
80
100
1
V
1 / V
1 / V
1
V
1 / V
1 / V
1 / V
1 / V
V
1 / V
1 / V
1 / V
1 / V
1 / V
1 / V
1 / V
1 / V

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Se1 80Se1 100Sev 65Sev 80Sev 100