Table of Contents
Advertisement
O
PERATING
Control Board
On the control panel you can set the DMX address, reset the fixture and
change fixture personality trait.
[SELECT] Changes menu function status and is used to set DMX address.
Control Board Functions
F
UNCTION
Addr
LP.ti
Shut
Col.1
Col.2
Iris
Focu
r.Pan
r.tilt
16.br
deMo
SoFt
dPSE
rSEt
dF.SE
LAMP
turn
CHnl
Fi.ti
LEG-5000X User Manual
I
NSTRUCTIONS
O
PTIONS
000~512 DMX channel addressing
Used lamp time
001
Pressing •• simultaneously zeroes lamp counter.
Off: Normal
On: Shutter closes during the changing of color, gobos
Off/On
or prism. Shutter will open after color, gobo or
prism is in position.
Off: Color wheel gradually advances to the next color
Off/On
allowing the user to stop between colors.
On: Color wheel will jump to the next color.
Off: Color wheel gradually advances to the next color
Off/On
allowing the user to stop between colors.
On: Color wheel will jump to the next color.
Off: Iris dims from narrow to wide
Off/On
On: Iris dims from wide to narrow
Off: Normal
Off/On
On: Focus adjustment
Off: Left to right head movement (Pan Normal)
Off/On
On: Right to left head movement (Pan Inverted)
Off: Down to up head movement (Tilt Normal)
Off/On
On: Up to Down head movement (Tilt Inverted)
Off: 8 bit control mode
Off/On
On: 16 bit control mode
Off: Normal
Off/On
On: Self-demo
Off: Quick paced function demonstration
On: Slow paced function demonstration
Off/On
Note: Only works with δεΝο = On
Off: Display off, press any key to turn on display
Off/on
On: Display On
Off: Normal
Off/On
On: Reset all motors at once
Off: Normal
Off/On
On: Reset entire unit, defaults to Off
Off: Lamp Off
Off/On
On: Lamp On
Off/On
Off: Normal
Off: Assign Pan & Tilt's DMX address to channel 11-14
Off/On
On: Assign Pan & Tilt's DMX address to channel 1-4
Fixture use timer. Press ▼▲ simultaneously for 3 seconds
001
to zero the timer. Unit: hour
[MENU] Toggles menu functions.
N
OTES
On: Reverse display
11
Revision: 2007-03-08/17:20
Advertisement
Table of Contents
