Christie DCP Series Instruction Sheet page 6

Upgrading to TPC Software v2.6 or Higher
Run the TPCInstaller.exe program remotely in order to update to the newly uploaded configuration—on
9.
the TPC side, highlight any file (otherwise the Specify command will be disabled). Then click the
Commands Specify command menu option:
10. In the Specify Command dialog box, enter the following command (note: you MUST use quotation
marks):
XFTP RUN "\Storage Card\Install\TpcInstaller.exe"
Page 6 of 9 010-101108-01 Rev. 1 (11/06)