Advertisement
From the Host List of FTP servers, click the TPC FTP server and Connect. Or, if using FFFTP for the
2.
first time, click New Host to create a new connection to the FTP Server. The Host Setting box should
now appear
.
Complete the Host Setting entries:
3.
•
Profile Name (name desired for TPC)
•
Host name/Address (TPC IP default address is 192.168.206.110—use the unique and valid address
defined for your site)
•
Username ( TPC user name)
•
Password (TPC user password)
Keep other settings as default. Click OK, going back to the Host List window.
Under the "Advanced" tab, make sure to Uncheck the selection to "Use PASV mode".
4.
Uncheck
010-101108-01 Rev. 1 (11/06)
Upgrading to TPC Software v2.6 or Higher
TIP: Use the
"Initial Local
Folder" to store
the location
where you keep
the TPC INSTALL
files.
TIP: Enter
"/Storage Card"
in the "Initial Host
Folder" to save
steps later.
Page 3 of 9
Advertisement
