Advertisement
Upgrading to TPC Software v2.6 or Higher
In the Host List window (refer back to the top of page 2), click your desired site, and then click Connect
5.
to connect to the TPC FTP server. Both devices should now appear in the FTP windows:
BACKUP ALL 5 .DAT FILES: Before upgrading, it is recommended that you backup the following
6.
projector data files. As shown, these are all stored in the IPSM directory on the TPC —use FTP to
transfer them to your PC.
Config.dat (projector's source,
channel, gamma, PCF, etc.)
Histories.dat
(lamp information)
Model.dat
(projector factory information)
LastButton.dat
(the last channel information on
TPC)
Hours.dat
(projector hours and lamp hours)
Page 4 of 9
010-101108-01 Rev. 1 (11/06)
Advertisement
