Position QE1 et QE2
The QE1 and QE2 buttons are factory-set but cannot be modified.
To enter a new position for buttons QE1 and QE2, simply adjust
the couch to the desired position and then press and hold the QE1
(or QE2) button for 6 seconds.
This is stored once the LED located above the command bar
blinks.
The position can now be recalled by pressing once on the QE1
or QE2 button.
NB: This position cannot be modified. It is strictly prohibited to use
the medical device to transfer patients.
It is strictly prohibited to load the medical device when it is on castors.
QE1 (factory settings)
QE2 (factory settings)
User's Guide
QE1
QE2
19