Front Turn Indicator Lamp Bulb; Side Repeater Lamp Bulb - Lotus ELISE 2007 Owner's Handbook Manual

RELEASING FRONT TURN LAMP
Front Turn Indicator Lamp Bulbs
For access to the front turn indicator bulb, the lamp unit must
be released from the body. Using a suitable stiff rod or screw-
driver blade inserted through the access hole in the outer top
corner of the air intake aperture, press back the lamp retaining
clip at the front end of the lamp, and withdraw the lamp suffi-
ciently for the elastic strap to be unhooked from the lamp clip.
Twist the bulb holder counterclockwise to release from the
lamp, and replace the bayonet fitting amber bulb.
After replacing the bulb and holder, ensure the rubber seal is
correctly positioned around the lamp before hooking the elastic
strap over the front clip on the lamp, engaging the tongue at the
rear end of the lamp unit with the body flange, and pressing the
front end of the lamp firmly down until a distinct 'click' is heard,
indicating engagement of the retaining clip. Pull up on the front
end of the lamp to check security.
Side Repeater Lamp Bulbs
For access to a side repeater lamp bulb, the lamp should
be removed from the body. Push the lamp rearwards to com-
press the retaining spring clip, and pull out the lamp from the
front edge. Twist the bulb holder ¼ turn counterclockwise and
withdraw from the lamp. Pull the 5W amber capless bulb from
the bulb holder.
Push a new bulb into the holder, and twist the holder into the
lamp. Refit the lamp by engaging the tab on the front edge and
pressing in at the rear.
oh_USA EliseExige E121.indd 151
ohs117
149
15/03/2010 15:08:15