Front Suspension & Steering - Lotus Europa Workshop Manual

CLUTCH
Clutch housing to gearbox
clutch assembly to flywheel
TRANSMISSION.
Gearbox casing (halves)
Differential case to crown wheel
Differential bearing adjusting nuts
Pinion bearing nut
Speedometer drive worm
Reverse selector pivot
Side cover plates
Gearbox mounting bracket to chassis
FRONT SUSPENSION & STEERING
Stub axle retaining nut
Ball joint - To vertical link
- To upper wishbone
Lower wishbone
Inner wishbone retaining nut *
Caliper mounting plate to hub
Steering arm to vertical link
Steering tie rod ball joint
Steering tie rod adaptor
Steering unit mounting clamps to chassis
Steering column impact clamp
* Tighten with suspension in static ride condition
REAR SUSPENSION.
Lower link and damper to bearing housing
Lower link to clutch housing
Lower link mounting bracket to transmission
----------------------------------------------------------------------------------------Section Updated: 6/27/2009 9:01 AM at http://www.lotus-europa.com ----------------------------------------------------------------------------------------
- To trunnion *
- To damper *
kg. m.
5.53 - 6.22
1.65 - 2.07
See Section 'F'
See Section 'F'
2.07
11.75
See Section 'F'
See Section 'F'
2.07
4.83
8.98 - 10.36
5.25 - 5.80
1.65 - 2.07
4.83
6.91
6.91
3.04 - 3.73
3.04 - 3.73
3.59 -3.87
6.91
1.38
3.59 - 4.42
7.60
5.53
1.65
- 15 –
lbs. ft.
40 - 45
12 – 15
15
85
15
35
65 - 75
38 - 42
12 - 15
35
50
50
22 - 27
22 - 27
26 -28
50
10
26 - 32
55
40
12