Beam Masking - Lotus ELISE 2007 Owner's Handbook Manual

Masking lever
m263

Beam Masking

If the car is temporarily to be used in an opposite drive hand
territory, the low beam bias should be masked to prevent daz-
zle. The headlamp units include a masking lever within each
low beam lamp, accessible after removing the wheelarch liner
front section and upper grommet. The lever incorporates a slot
for a small flat balded screwdriver, but is located in one of four
different sites dependent on handing and market.
146
oh_USA EliseExige E121.indd 148 15/03/2010 15:08:15