Lotus ELISE 2007 Owner's Handbook Manual page 95

SCREEN HEADER TRIM
8. Using the special tool provided, install the windscreen header
cover panel by locating first with the central screw, and then
by the outer screws before tightening in the same order.
9. Position the clamp bracket at the centre rear edge of the roof,
and secure with its two screws, using the same special tool
to tighten.
WARNING:
• Do not drive the car with the trim cover panels removed.
Injury could result from contact with the roof brackets
in a car collision.
• Before driving check that the roof is secure by pulling
upwards on each corner in turn. If any upward move-
ment is evident, check the correct fitment of all mounting
brackets. An insecure or incorrectly fitted roof could
cause death or serious injury to other road users or a
crash in which you or others could be killed or seriously
injured.
oh_USA EliseExige E121.indd 95
93
15/03/2010 15:08:10