Multitek MultiLed M812-LD Series Operating Manual page 41

nrgy
rest
nrgy
y n
4.6 The MultiLed measures Average Demand and Max Demand of
Amps, Watts and VA. Demand times between 3 & 30 mins can be
programmed when in dt (demand time) programming mode. The
MultiLed samples the instantaneous values for 1 min. then takes
the average of these samples & updates the reading. This sampling
updating ever min. continues until the time period selected is
reached. e.g. If time period is 15 min. then after 15 min. the ave. of
15 min. demand is displayed. When the 16th min. is reached the
ACTION :
Press 4 times.
COMMENTS :
The MultiLed is now in the energy
register reset mode.
ACTION :
Press
COMMENTS :
The screen now display's the option to
either reset energy register (Y) yes or do
not reset energy registers (N) no. Press
(Y) to reset W.h &VAr.h registers or Press
(N) if resetting of registers is not reqd.
40