Multitek MultiLed M812-LD Series Operating Manual page 24

230.0
To change from 230 volts to for example 11kV :-
230.0
030.0
ACTION :
Press
COMMENTS :
Display shows nominal voltage
programmed by the factory. In this
example 230 volts L.N. The cursor flashes
under the 1 st digit.
ACTION :
Press
COMMENTS :
Pressing scrolls the digit with the
cursor flashing below it from 0 to 9. When
the digit required is displayed Press
store. In this example 0 is required so
Press when zero is displayed.
ACTION :
Press
COMMENTS :
Cursor moves to the 2nd digit.
23
to