Technical Information Summary - Kontron aFLAT Series Manual

Hide thumbs

Table Of Contents

Table of Contents

1.1

The CRTtoLCD-6-SM is a highly integrated TFT panel interface controller,

which allows an easy adaptation of standard analog video sources to a

TFT panel with LVDS interface. The CRTtoLCD-6-SM needs only one

single 12V DC power supply and incorporates all needed functionality,

including optional 4,5 or 8 wire touch controller for USB or PS/2 interfaces,

to build up a full featured TFT monitor. The card generates the necessary

power sequencing for the flat screen. The highly flexible architecture of the

CRTtoLCD-6-SM panel interface allows adapting nearly any available TFT

panel. Therefore a variety of panel adapters and programming are

available on request.

1.2

Analog-Input Features :

- Fully integrated 162 MHz 8-bit triple-ADC, PLL and pre-amplifier

- On-chip programmable OSD engine

- Integrated PLLs

- 10-bit programmable gamma correction

Integrated Analog Front End

- Integrated 8-bit triple ADC

- Up to 162 MHz sampling rates

- No additional components needed

- All color depths up to 24-bits/pixel are supported

High-Quality Advanced Scaling

- Fully programmable zoom

- Independent horizontal / vertical zoom

- Enhanced and adaptive scaling algorithm for optimal image quality

- Recovery Mode / Native Mode

Input Format

- Analog RGB VGA up to SXGA (75 Hz)

- Shrink from UXGA (60 Hz)

Operating Modes

- Bypass mode with no filtering

- Multiple zoom modes: - with filtering, - with adaptive (ACE) filtering

Integrated On-Screen Display

- On-chip character RAM and ROM for better customization

- Optional external OSD supported for greater flexibility

- Supports both landscape and portrait fonts

- Many other font capabilities including: blinking, overlay and transparency

15.04.2004

Introduction