On Screen Display; Brightness Menu - Kontron aFLAT Series Manual

Hide thumbs

Table Of Contents

Table of Contents

1.5

With the OSD ( On Screen Display ) you can modify the settings and

control the special features of the CRTtoLCD-6-SM. The OSD uses a

number of menus for making changes and turning the special features on

or off. The configuration can be done via the OSD-keypad (OSD-Panel-

Kit).

To start the OSD press the "Menu" button on the keypad, after switching

the power supply on. If a valid flat panel configuration is installed the OSD

Main Menu will be displayed.

To select an tab, simply use button "Menu" to move the cursor to the tab

you want and press button "EXIT". When you use the tab "Exit" and press

the "EXIT"-button, the OSD will be closed.

To use a tab menu, simply use "Menu"-button to select the field.

Use "Left" or "Right" to select a value for that field. The "Exit"-field on the

bottom-side on the tab will go up to the tab-selection. Simply press the

"Exit"-button.

To save parameters permanently, use the tab "Tools" and select the

"Save settings"-field. The button "Exit" will be saved the actual settings to

non-volatile memory.

Brightness Menu

Feature

Brightness

Use "Left" and "Right"

Blacklevel

Use "Left" and "Right"

Contrast

Use "Left" and "Right"

Backlight

Use "Left" and "Right"

Exit

Color Menu

Feature

Hue

Use "Left" and "Right"

Saturation

Use "Left" and "Right"

Fleshtone

Use "Left" and "Right"

Color Temp.

Use "Left" and "Right"

- Red

Use "Left" and "Right"

- Green

Use "Left" and "Right"

- Blue

Use "Left" and "Right"

Exit

Image Menu

Feature

Width

Use "Left" and "Right"

Phase

Use "Left" and "Right"

Hor. Postion

Use "Left" and "Right"

Ver. Postion

Use "Left" and "Right"

Sharpness

Use "Left" and "Right"

Exit

15.04.2004