Safety Warnings - DeVilbiss COBRA 3C Operation Manual

Safety Warnings

Fire and explosion
Solvents and coating materials can be highly flammable or combustible when sprayed.
ALWAYS refer to the coating material supplier's instructions and COSHH sheets
before using this equipment.
Users must comply with all local and national codes of practice and insurance company
requirements governing ventilation, fire precautions, operation and house-keeping of working
areas.
This equipment, as supplied, is NOT suitable for use with Halogenated Hydrocarbons.
Static electricity can be generated by fluid and/or air passing through hoses, by the spraying
process and by cleaning non- conductive parts with cloths. To prevent ignition sources from
static discharges, earth continuity must be maintained to the spray gun and other metallic
equipment used. It is essential to use conductive air and/or fluid hoses.
Personal Protective Equipment
Toxic vapours – When sprayed, certain materials may be poisonous, create irritation or are
otherwise harmful to health. Always read all labels, safety data sheets and follow any
recommendations for the material before spraying. If in doubt, contact your material
supplier.
The use of respiratory protective equipment is recommended at all times. The type of
equipment must be compatible with the material being sprayed.
Always wear eye protection when spraying or cleaning the spray gun.
Gloves must be worn when spraying or cleaning the equipment.
Injection Hazard – Spray from the gun, hose leaks or ruptured components can inject fluid
through skin into the body and cause extremely serious injury including poisoning. GET
IMMEDIATE MEDICAL ATTENTION. INFORM THE DOCTOR WHAT TYPE OF MATERIAL
WAS INJECTED.
Do not put fingers or hand over the spray tip.
Replace all worn, damaged or loose parts immediately.
Training – Personnel should be given adequate training in the safe use of spraying
equipment.
Misuse
Never aim a spray gun at any part of the body.
Never exceed the max. Recommended safe working pressure for the equipment.
The fitting of non-recommended or non-original spares may create hazards.
Before cleaning or maintenance, all pressure must be isolated and relieved from the
equipment.
The product should be cleaned using a gun-washing machine. However, this equipment
should not be left inside gun-washing machines for prolonged periods of time.
Noise Levels
The A-weighted sound level of spray guns may exceed 85 dB (A) depending on the set-up
being used. Details of actual noise levels are available on request. It is recommended that
ear protection is worn at all times when spraying.
4 © 2014 Finishing Brands UK Ltd.