Next Steps
Data Sheet
DS757 SP605 Embedded Kit MicroBlaze Processor Subsystem Data Sheet
•
Tutorials
UG729 SP605 MicroBlaze Processor Subsystem Software Tutorial
•
UG728 SP605 MicroBlaze Processor Subsystem Hardware Tutorial
•
Reference Designs
MicroBlaze Processor Subsystem
•
MicroBlaze Processor Subsystem with Video Pipeline Demo
•
32
Documentation\
ds757_SP605_MicroBlaze_Processor_SubSystem_datasheet.pdf
•
Detailed data sheet documentation of the MicroBlaze Processor Subsystem
including block diagram, address map, pinout, FPGA design utilization and
performance.
Documentation\ug729_SP605_software_tutorial.pdf
•
This tutorial will guide you through the steps to start software development using
Xilinx SDK (Eclipse IDE) and the MicroBlaze Processor Subsystem.
•
This will show you how to create stand-alone (no OS) programs from simple
Hello World designs to a more complex Board Test program.
•
This will also show you how to boot a Linux platform for the MicroBlaze
Processor Subsystem and provide pointers to start Linux development.
Documentation\ug728_SP605_hardware_tutorial.pdf
•
This tutorial will guide you through the steps to open the MicroBlaze Processor
Subsystem using Platform Studio and add the Video Pipeline DSP blocks to
recreate the out-of-the-box Embedded Kit demo.
•
This will also show you how to add ChipScope debug cores to monitor your
embedded system using the ChipScope Logic Analyzer.
SP605_System
•
This is the base MicroBlaze Processor Subsystem including the software
applications and platforms.
Video_Demo
•
This is the MicroBlaze Processor Subsystem with the Video Pipeline that was run
as the power-on demo. Source files for the demo including the software
application and platform are included here.
www.xilinx.com
SP605 Getting Started Guide
UG727 (v1.1) June 21, 2010
Need help?
Do you have a question about the Spartan-6 FPGA SP605 Embedded Kit and is the answer not in the manual?
Questions and answers