Data Cables - Dalsa Linea HS Series User Manual

Data Cables

LC Fiber Optic (HL-FM Cameras)
Used by the following camera models:
• HL-FM-04K30H-00-R
• HL-FM-08K30H-00-R
• HL-FM-13K18H-00-R
• HL-FM-16K15A-00-R
The fiber optic cables for the HL-FM camera models require LC connections on both ends of the
cable. The frame grabber requires the LC connector to be plugged into an SFP+ transceiver
module.
LC is a small-form factor fiber optic connector that uses a 1.25 mm ferrule, half the size of a
standard connector. These cables are in wide use in the telecommunications industry and available
in many lengths.
The distance through which the data can be transmitted depends on the type of fiber optic used.
Recommended fiber optic cables are types OM3 and OM4.
OM4 is used for distances > 300 m, but also requires SFP+ transceiver module changes.
Contact Teledyne DALSA Support for more information on recommended cables.
Table 12: LC Fiber Optic Cable Details
Category
OM3
OM4
34 • Linea HS Series Cameras
Fiber Diameter
50 µm
50 µm
Mode
Multimode
Multimode
Linea HS Series Camera User's Manual
Max Distance
< 280 m
> 300 m