Supermicro SuperServer E200-9B User Manual page 46

SuperServer E200-9B User's Manual
Native PCIE Enable
Select Enabled to enalbe the PCI Express Native support. This feature is only available on
Windows® Vista. The options are Disabled and Enabled.
PCIe/PCI/PnP Configuration

PCI Bus Driver Version
PCI Devices Common Settings:
Above 4G Decoding
Select Enabled for 64-bit devices to be decoded above the 4GB address space If 64bit PCI
decoding is supported by the system. The options are Disabled and Enabled.
CPU SLOT1 PCI-E 2.0 X1 (IN X8)
Use this feature to select the type of firmware to be loaded for the device installed on this
slot. The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Select Enabled to enable Option ROM support to boot the computer using a network device
specified by the user. The options are Legacy and EFI.
Onboard LAN1 Option ROM
Use this option to select the type of device installed in LAN Port1 used for system boot. The
default setting for LAN1 Option ROM is PXE. The options are Disabled, PXE, and iSCSI.
Onboard LAN2 Option ROM
Use this option to select the type of device installed in LAN Port2 used for system boot. The
default setting for LAN2 Option ROM is Disabled. The options are Disabled and PXE.
Onboard LAN3 Option ROM
Use this option to select the type of device installed in LAN Port3 used for system boot. The
default setting for LAN3 Option ROM is Disabled. The options are Disabled and PXE.
Onboard LAN4 Option ROM
Use this option to select the type of device installed in LAN Port4 used for system boot. The
default setting for LAN4 Option ROM is Disabled. The options are Disabled and PXE.
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
46