Table of Contents
Advertisement
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to the header to inform you when the chassis is opened.
4-pin Connector for HDD
This 4-pin power connector at JSATA1 provides power from the motherboard to internal SATA
hard drive or SSD device. Refer to the table below for pin definitions.
Pin Definitions
Pin#
Definition
1
12V
2
GND
3
GND
4
5V
SATA Ports
The X11SBA-LN4F/F has two SATA 3.0 ports that are supported by the Intel SoC. I-SATA1
supports SuperDOM.
Mini PCI-E Slot
The Mini PCI-E slot is used to install a compatible Mini PCI-E device. Refer to the table below
for pin definitions.
The mSATA feature leverages the speed and reliability of the SATA interface to provide a high
performance, cost-effective storage solution for smaller devices like notebooks and netbooks.
The specification maps SATA signals onto an existing small form factor connector, enabling
more compact integration in a wide variety of applications for both hard disk (HDD) and solid
state drives (SSDs). The mSATA connector allows you to increase the storage offerings of
without compromising valuable space. The mSATA feature is mux with I-SATA0.
Chapter 3 Motherboard Connections
Chassis Intrusion
Pin Definitions
Pins
Definition
1
Intrusion Input
2
Ground
27
4
1
JSATA1 Pin Layout
Advertisement
Table of Contents
