Supermicro SuperServer E200-9B User Manual page 26

SuperServer E200-9B User's Manual
TPM Header
The JTPM1 header is used to connect a Trusted Platform Module (TPM). A TPM can securely
store artifacts used to authenticate the platform. These artifacts can include passwords,
certificates, or encryption keys. See the table below for pin definitions.
Trusted Platform Module Header
Pin Definitions
Pin# Definition
1 LCLK
3 LFRAME#
5 LRESET#
7 LAD3
9 3.3V
11 LAD0
13 SMB_CLK4 (X)
15 P3V3_STBY
17 GND
19 P3V3_STBY
Standby Power
The Standby Power header is located at JSTBY1 on the motherboard. See the table below
for pin definitions.
4-pin BMC External I
A System Management Bus header for IPMI 2.0 is located at JIPMB1. Connect a cable to this
header to use the IPMB I
Pin# Definition
2 GND
4 No Pin
6 +5V (X)
8 LAD2
10 LAD1
12 GND
14 SMB_DAT4 (X)
16 SERIRQ
18 GND
20 LDRQ# (X)
Standby Power
Pin Definitions
Pin# Definition
1 +5V Standby
2 Ground
3 No Connection
C Header
2
C connection on your system. See the table below for pin definitions.
2
External I
2
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
26
19
20
JTPM1 Pin Layout
C Header
1
2