Supermicro SuperServer E200-9B User Manual page 32

Table of Contents

Advertisement

SuperServer E200-9B User's Manual
Main Power LED
A Main Power LED is located at LED3 on the motherboard. When this LED is on, the system
power is on. Be sure to turn off the system power and unplug the power cord before removing
or installing components. See the table below for more information.
BMC Heartbeat LED
LEDBMC is the BMC heartbeat LED. When the LED is blinking green, BMC is functioning
normally. See the table below for the LED status.
CPU Power LED
A CPU Power LED is located at LED1 on the motherboard. When this LED is on, the CPU
Power is on. Be sure to turn off the system power and unplug the power cord before removing
or installing components. See the table below for more information.
Standby Power LED
A Standby Power LED is located at LED2 on the motherboard. When this LED is on, the
Standby Power is on. Be sure to turn off the system power and unplug the power cord before
removing or installing components. See the table below for more information.
Main Power LED Indicator
LED Color
Definition
System Off (power
Off
cable not connected)
Green
System Power On
Green: Flashing Quickly
ACPI S3 State
Onboard Power LED Indicator
LED Color
Definition
Green:
BMC Normal
Blinking
LED1 Indicator
LED Color
Definition
Off
CPU Power Off
Blue
CPU Power On
LED2 Indicator
LED Color
Definition
Standby Power Off (power
Off
cable not connected)
Standby Power Cable
Green
Connected
32

Advertisement

Table of Contents
loading

Table of Contents