Download Print this page

Gorenje SD-450 EA Instructions For Use Manual page 11

Food chopper & slicer

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
FOOD CHOPPER & SLICER
1
Motor Unit
2
Speed control and locking / unlocking button
3
Pulse button
4
Locking handles
5
Tight plate
5a Ring of tight plate
6
Flowing gutter
7
Pusher
8
Glass bowl
9
Stainless shaft
10 Rubber pad
11 Accessory support
12 Blade
13 Blade protector
14 Plastic whisking accessory
15 Disc holder
16 Slicing disc.
17 Shredding disc- thin
18 Shredding disc- thick
19 Spatula
OPERATING INSTRUCTION
Before using the chopper& slicer, read carefully the following operating instructions.It is suggested that you keep this
instructions in a safe place for future reference.
This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE). This guideline is the frame of a European-wide validity of return and
IMPORTANT
Check whether the voltage indicated on the chopper&slicer is the same as the voltage in your home.
SAFETY
• Do not place the appliance near or over any heat source which could cause damage.
• Use the appliance on a stable work surface away from water.
• Always put the rubber pad under the glass bowl when it is in use.
• Allow rotating parts to come to a complete stop before taking the tight plate off.
• Be carefull when handling the all accessories as they are have extremely sharp cutting edges.
• Do not use the appliance if the appliance itself or power cord or blade is damaged.
• Unplug the appliance after each use.
• Always use the pusher to feed the food into the food chute, never use your fingers, forks, knives or any other object.
• The appliance is intended for domestic use only and it is not designed for commercial use.
• If the power cord is damaged,it must be replaced by the manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
recycling on Waste Electrical and Electronic Equipment.
11
EN

Advertisement

loading