Section 9: Illustrated Parts List; Parts Ordering Procedure - Vanair AIR N ARC RELIANT 300 Series Operations Manual & Parts List

®
AIR N ARC 300 SERIES ALL-IN-ONE POWER SYSTEM
ILLUSTRATED PARTS LIST

9.1 PARTS ORDERING PROCEDURE

Part orders should be placed through the distributor
from whom the unit was purchased. If, for any reason
parts cannot be obtained in this manner, contact the
factory directly at the address or phone numbers
below.
When ordering parts, always indicate the Serial Number
of the machine package. This can be obtained from the
Bill of Lading for the machine package, or from the
compressor unit serial number plate. See Figure 9-1 for
location of machine package serial plate. Consult Table
9A: Recommended Spare Parts List on the next page
for a listing of replacement parts.
COMPRE SSOR INPUT RPM
MACHINE SERIAL PLATE
Figure 9-1: Machine Package Serial Number Plate Location
SECTION 9:
800-526-8817
www.vanair.com
MODEL NUMBER
SERIAL NUMBER
PSIG
MAXIMUM PRE S SURE
260940
090034-OP_r0
®

SECTION 9: ILLUSTRATED PARTS LIST

VANAIR
Michigan City, IN 46360
Telephone: (800) 526-8817
Service Fax: (219) 879-5335
Parts Fax: (219) 879-5340
®
MANUFACTURING, INC.
10896 West 300 N.
(219) 879-5100
Sales Fax: (219) 879-5800
www.vanair.com
PAGE - 113