Hydraulic Overtemp Indicator Lamp; Machine Control (Reset) Switch; Section 2: Description (Continued); Hour Meter - Vanair AIR N ARC RELIANT 300 Series Operations Manual & Parts List

SECTION 2: DESCRIPTION
PAGE - 32
®
AIR N ARC 300 SERIES ALL-IN-ONE POWER SYSTEM

2.6.16 HYDRAULIC OVERTEMP INDICATOR LAMP

The hydraulic overtemp indicator lamp signifies that
the machine has shut down due to excessive hydraulic oil
temperature (180°+F).

2.6.17 MACHINE CONTROL (RESET) SWITCH

The machine activation switch engages the phases of
the motor, which is integral to all the functions of the 300
Series Power System. Consult the various operating
procedures as found in Section 4, Operation, to
determine the integration of the motor with each separate
system function.
If shutdown occurs, this switch must be reset and turned
back on for operation after the problem has been fixed.

2.6.18 HOUR METER

The hour meter records the total accumulated hours that
the package is operated. The hour meter can be used to
assist in scheduled maintenance planning.
The metor only records hours when the motor is running
(not while bypassing).
090034-OP_r0
®