Section 9: Illustrated Parts List; Parts Ordering Procedure - Vanair AIR N ARC RELIANT 250 Series Operations Manual & Parts List

®
AIR N ARC 200 SERIES ALL-IN-ONE POWER SYSTEM
ILLUSTRATED PARTS LIST

9.1 PARTS ORDERING PROCEDURE

Part orders should be placed through the distributor
from whom the unit was purchased. If, for any reason
parts cannot be obtained in this manner, contact the
factory directly at the address or phone numbers
below.
When ordering parts, always indicate the Serial
Number of the machine package. This can be
obtained from the Bill of Lading for the machine pack-
age, or from the compressor unit serial number plate.
See Figure 9-1 for location of machine package
serial plate. Consult Table 9A: Recommended
Spare Parts List on the next page for a listing of
replacement parts.
MODEL NUMBER
SERIAL NUMBER
MAXIMUM PRE SSURE
COMPRE SSOR INPUT RPM
Figure 9-1: Machine Package Serial Number Plate Location
®
SECTION 9:
800-526-8817
www.vanai r.com
PSIG
260940
090019-OP_r0

SECTION 9: ILLUSTRATED PARTS LIST

®
VANAIR MANUFACTURING, INC.
10896 West 300 N.
Michigan City, IN 46360
Telephone: (800) 526-8817
(219) 879-5100
Service Fax: (219) 879-5335
Parts Fax: (219) 879-5340
Sales Fax: (219) 879-5800
www.vanair.com
PAGE - 115