Vanair AIR N ARC RELIANT 300 Series Operations Manual & Parts List page 57

®
AIR N ARC 300 SERIES ALL-IN-ONE POWER SYSTEM
System Component or
Part Group Task
Machine Clearance Allowance
Determining Proper Ventilation
Requirements
Roof Requirements (If Applicable)
When determining the best location to mount the Air N
Arc 300 Series machine and also its remote components,
the following criteria must first be taken under
consideration:
• Machine package dimensions: Refer to
Figure 4-10 for dimension measurements,
including auxiliary component dimensions,
where applicable..
• Minimimal clearance allowances for the
purpose of cooling, ventilating and machine
access (in addition to each dimension of the
machine).
• Free-flow allowance of fresh circulating air
for cooling purposes.
• Remote component locations' proximity to
machine (air tank, instrument panel, roof
[optional]).
• Hindrance to any access, or operation of,
other standard or mounted vehicle
system(s), including any underdeck, or
chasis wiring, piping, etc.,
• Clear pathways for route lines and wires,
which are free of sharp edges, sharp angles
and heat contact (if applicable).
• Service output location.
Additional service
following:
• Ensure that the mounting surface for the
machine, as well as any remote
component(s), are level, cleared of debris,
and able to support the machine and/or its
component(s) after being mounted.
• For particular load-bearing locations, if
necessary, additional support may be
®
Manual
Section
4.4.1
4.4.2
4.4.3
body preparation includes
090034-OP_r0
Location
page 40
page 40
page 40
When determining the proper machine
mounting location on the vehicle body,
always consider the location's effect on
safe operation of the machine. Use the
guidelines given in Section 1, Safety to
verify an optimal, safe location before
permanently mounting the machine.
the
SECTION 4: INSTALLATION
CAUTION
PAGE - 39