Mounting The Machine - Vanair AIR N ARC RELIANT 300 Series Operations Manual & Parts List

SECTION 4: INSTALLATION
A
C
B
KEY
A
BASE COVER
B TRUSS SCREW 1/4 (x6)
C NYLON FLAT WASHER 1/4 (x6)
D WASHER 1/2 (X4)
PAGE - 42

4.5 MOUNTING THE MACHINE

Mounting the Machine
Separating the Machine From the Shipping
Crate Mounting
Marking the Machine Mounting
Location
Stabilizing Precautions for Machine Mounting
D
E
F
DESCRIPTION
Figure 4-2: Removing Package from Crate Mounting
090034-OP_r0
®
AIR N ARC 300 SERIES ALL-IN-ONE POWER SYSTEM
Refer to Figure 4-1. Once all of the factors listed in
Section 4.3 have been considered, and the machine
placement location has been resolved, the machine must
be fully unpackaged from its crate mounting.
System Component or
Part Group Task
G
G
KEY
E MOUNTING BOLT 1/2 (x 4)
F SHIPPING CRATE SKID PLATFORM
G AIR N ARC 300 PACKAGE UNIT
H BASE COVER (WITH CUTOUT)
Manual
Location
Section
4.5 page 42
4.5.1 page 43
4.5.2 page 43
4.5.3 page 44
D
C
E
F
B
DESCRIPTION
®
H