Section 7: Illustrated Parts List; Parts Ordering Procedure - Vanair AIR N ARC RELIANT 150 Series Operations Manual & Parts List

All-in-one power systems

Hide thumbs

Table Of Contents

Table of Contents

AIR N ARC

150 SERIES

ILLUSTRATED PARTS LIST

7.1 PARTS ORDERING

PROCEDURE

Part orders should be placed through the

distributor from whom the unit was pur-

chased. If, for any reason parts cannot

be obtained in this manner, contact the

factory directly at the address or phone

numbers listed on this page.

When ordering parts, always indicate the

Serial Number of the machine package.

This can be obtained from the Bill of Lad-

ing for the machine package, or from the

compressor unit serial number plate. See

Figure 7-1 for location of machine pack-

age serial plate. Consult Table 7A: Rec-

30-GALLON & SKID-MOUNT

MACHINE PLATE LOCATION

Figure 7-1: Machine Package Serial Number Plate Location

Vanair Manufacturing, Inc.

vanair.com • 800-526-8817

SECTION 7:

MODEL NUMBER

SERIAL NUMBER

MAXIMUM PRE SSURE

COMPRESSOR INPUT RPM

When contacting the Service

Department, please have machine

serial number on hand to quickly

090051-OP_r0 (FEB-2014)