VAM 10.1 / VAM 40.1
6
Module Layout
6.1
General Information
Labeling Templates for Slide-In Strips
6.2
Basic Device
DOK-SUPPL*-VAM*10/40**-PR02-EN-P
Labeling templates are published via the Internet and can be downloaded
under
http://www.boschrexroth.com/BoschRexroth/business_units/brc/en/
downloads_uebersicht_de/index.jsp.
The icons to label the machine function keys can be inserted in the
templates and be printed on transparent foil with the help of a laser
printer.
Note:
If it is not possible to print on foils, the template can be printed
on paper and then copied on foil.
After cutting out the slide-in strips, they can be inserted on the rear side of
the devices.
Note:
As the VAM 10.1 is equal to the basis device of the VAM 40.1,
the former is not separately described.
Fig. 6-1:
Basic device
Note:
VAM-type device are delivered without rear covering plate.
1
Module Layout
VAM_40_Basisgerät.FH9