Casablanca Bel Air Halo Owner's Manual page 7

Step 9. To hang the fan body in the
canopy, hold the fan body firmly and insert
the ball into the canopy opening. Check
that no wires were pinched. Rotate the fan
body until the slot in the ball fits into the
pin opposite the canopy opening.
Dimensions: Weight:
Height 25.5 lbs
18 / "
1
2
Step 10. Attach the fan wires to the
ceiling fixture outlet box wiring by
twisting the bare ends of the wires
together and then securing with a
wire nut.
Connect in this order:
• GREEN leads from mounting plate
and fan to GROUND conductor of
power source. Secure with wire
nut.
• WHITE wire from fan to white NEU-
TRAL wire in ceiling fixture outlet
box. Secure with wire nut.
• BLACK wire from fan to black (or red)
POWER wire in ceiling fixture outlet
box. Secure with wire nut.
Step 11. Tuck the wires into the
canopy with the wire nuts pointed
upwards, so that the WHITE and BLACK
wires are on opposite sides of the
canopy and all wires are clear of the
canopy opening.
Step 12. Install canopy hatch with the
last canopy screw and lock washer. To
do this, tilt the fan body away from the
hatch opening.
Step 13. Straighten the fan, then
check to ensure that there is no
movement between the canopy and
ceiling or Hang-Tru ball and top sup-
port shaft.
HANGING THE FAN
CANOPY ELECTRICAL CONNECTIONS
BLACK WIRES
(2)
WHITE WIRES
(2)
WIRE NUT
CANOPY HATCH INSTALLATION
CANOPY
HATCH
CANOPY
WASHER
CANOPY
SCREW
B A H
EL IR
BALL
SLOT
GREEN WIRES
(3)
ALO ™
PIN
TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
7