Casablanca Bel Air Halo Owner's Manual page 15

INTELI•TOUCH2
Your Ineli•Touch2 fan is able to work with an optional accessory Remote
Control in conjucion with the W-82 wall control.
Please see your dealer for assistance.
PROBLEM
NO FAN OR LIGHT
FAN WOBBLES OR SHAKES
EXCESSIVELY
FAN NOISY DURING
OPERATION
BREAK-IN PERIOD
DOES NOT RUN ON
LOW SPEED
WHEN AC POWER IS TURNED ON FOR THE FIRST TIME, THE LIGHTS OPERATE NORMALLY, BUT W-82 WALL
CONTROL OPERATION IS REVERSED: FAN BUTTON OPERATES THE LIGHTS; LIGHT BUTTON OPERATES THE
FAN: Reverse the 2 black and white striped wire connections.
FAN OR LIGHTS APPEAR TO OPERATE BY THEMSELVES (CHANGING SPEED OR INTENSITY), WALL CONTROL
OPERATION IS INTERMITTENT: Check AC supply for irregularities, (noise spikes, fluctuations, or failure); or circuit board as-
sembly.
OPTIONAL REMOTE CONTROL
INTELI•TOUCH2
Check main circuit fuses, curcuit breakers, or wall switch position. Check all wire connections, making
sure the power is turned off during this inspection.
Be sure canopy pin is properly set into the slot on the ball
Check the screws holding the blade holders to the fan motor. Tighten as necessary.
Check the angle of the blades to make sure that a blade holder has not been bent during installation.
Check and tighten light fixture retaining screws, glass shade screws and/or the light bulb(s).
Tighten canopy screws and mounting plate assembly.
Tighten the blade to bladeholder screws and blade holders to flywheel.
Make sure all screws in the motor housing are snug, but not overly tight.
Check that the wire nuts inside the canopy and switch housing are not touching the metal parts or
have fallen off the wire splices. Tighten or adjust as necessary.
Let fan run at high speed for two (2) hours
If new, "break-in" may be required - run at higher speed for several days
For questions or to locate the nearest
Casablanca Authorized Service Center
call toll free:
1-888-227-2178
or visit us on the web at:
www.CasablancaFanCo.com
POSSIBLE REMEDIES
15