Installation On A Bare Wall; Installation Using A Wallplate - Emerson uerdant VX Series Installation Manual

Before You Begin

Installation on a Bare Wall

Select the appropriate installation location for the thermostat. Refer to
➤
installation considerations section of this manual;
With the faceplate removed, place the thermostat on the wall in the
➤
installation location and mark location for drilling holes for the two (2)
mounting screws;
Drill two (2) 3/16" holes in the wall and insert the two (2) supplied wall
➤
anchors;
Use the two (2) supplied screws to securely mount the thermostat to the wall;
➤
Insert two (2) AA-cell batteries (not supplied) into the thermostat battery
➤
compartment.
8
Before You Begin

Installation Using a Wallplate

Select the appropriate installation location for the thermostat. Refer to
➤
installation considerations section of this manual;
Place the wallplate over the hole in the wall left by the previous thermostat,
➤
and mark two locations for drilling holes;
Drill two (2) 3/16" holes in the wall and insert the two (2) supplied wall
➤
anchors;
Mount the wallplate to the wall using the two (2) supplied screws.
➤
With the faceplate removed, place the thermostat on the wallplate in the
➤
installation location and screw the thermostat onto the wallplate;
Insert two (2) AA-cell batteries (not supplied) into the thermostat battery
➤
compartment.
9