Accessing The Sensor Setup Menu; Activating A Sensor - Emerson uerdant VX Series Installation Manual

Confi guring & Managing Accessories

Accessing the Sensor Setup Menu

With the thermostat and HVAC unit powered, follow the sensor confi guration
instructions to correctly confi gure the sensors.
Remove the faceplate from the thermostat
➤
Press and hold the confi g button until SENS appears on the screen.
➤
CONFIGURATION BUTTON
28
Confi guring & Managing Accessories

Activating a Sensor

Remove the cover of the sensor(s) to be paired in the room;
➤
Insert two (2) AAA-cell battery into each sensor (not supplied);
➤
Press the button inside the sensor to make the sensor discoverable;*
➤
Press the FAN button on the thermostat to initiate the pairing procedure. This
➤
will initiated a countdown that may take up to ten (10) seconds.
*The sensor(s) will remain discoverable for fi ve (5) minutes after pressing the button
inside the device. If the pairing process has not been completed within fi ve (5)
minutes of making sensor(s) discoverable, repeat this step.
29